Describe the disassembly method of toilet seat

We need to make sure the size of the toilet before we change the seat, so as not to buy it is not suitable. So how to change after buying a good seat? First, we need to find the screw that holds the seat ring in place. When we find it, we need to unscrew it with a wrench. After removing the decorative hardware, we can take down the old toilet seat.

Then clean the next seat ring area, you can install the new seat ring, using the same method with a wrench to tighten the screws, remember to and off the direction of the opposite oh. When replacing toilet seat, only need to remove the fixed bolt at the rear of the toilet to be replaced. When installing, the opposite direction can be operated.

Most toilet seats have no size. Just adjust two bolts when installing them. But you also need to measure the size, screw hole distance, width and length of the toilet seat, and then buy a new toilet seat for replacement. What different style toilet seat installs is different also, it is the position that toilet seat bottom end connects toilet seat normally behind that is to use screw to screw up, want the hand to reach down only to find the screw of that two sides to unscrew to be able to take whole cover down, very simple, you can try.

There are also issues that consumers need to be aware of during the installation process. First, remove the body fixing plate of the smart toilet seat, and then fix the fixing plate on the toilet with screws. Then, align the smart toilet seat with the slot and press down and fix it.