how to fit concealed cistern flush

Concealed sinks are a great way to save bathroom space and achieve a clean and modern look. If you're wondering how to install a concealed flush, rest easy because while it can be challenging, with a little practice and guidance, it's a worthwhile task.

Step 1 - Preparation

Here is a list of things you will need:

- Concealed cistern
- Cistern plate
- flushing pipes
- Water connection
- Hammer
- chisel
- Spirit level
- screwdriver
- Wrench
- screwdriver

Step 2 - Drill the Holes

First you need to drill the holes to accommodate the concealed cistern and cistern plate. Use a level to ensure the hole is straight and level. Make sure you only drill a small hole to ensure the hole fits and fits tightly.

Step 3 - Install the concealed cistern

Insert the concealed cistern into the hole and make sure it is secure. It is important to ensure that the cistern is level with no edges or gaps to connect the panel.

Step 4 - Install the cistern plate

Once the cistern is secure, you should install the cistern plate. Connect the plate to the cistern and make sure it is properly seated. You can then attach the plate cover to keep it secure.

Step 5 - Install the flush pipes

Use a level to make sure the pipes are sitting straight and at the same height. This ensures that the water from the cistern is drained smoothly and efficiently.

Step 6 - Connect the water connections

Last but not least, you need to connect the water connections. This is a water-resistant connector that ensures that water from the cistern flows efficiently and the toilet flushes properly.

Installing a concealed flush may seem challenging at first, but with a little practice and the right tools, it is a worthwhile task.