Precautions for replacing a toilet seat
Jun 15, 2021
When replacing the toilet seat, only the fixed bolt at the rear of the toilet can be removed, and the opposite direction can be operated when installing.
Most toilet seats are not divided into size, the installation of the adjustment of two bolts on the line. But you also need to measure the size, screw hole distance, width and length of the toilet seat, and then buy a new toilet seat for replacement! To install the toilet seat, you need to remove the bolts at the back of the toilet, remove the previous cover, and then replace the cover with a new one.
Walk around the toilet, see where the screw cap of the toilet seat is, then choose the appropriate wrench, remove the screw cap and replace it. The general position of the screw cap is not easy to find, some in the light, some in the dark. Screw cap in the dark, inside the toilet against the side of the tank, open the cover. Reach in with the hand, upward, to the direction of the water tank, should be able to touch, see is invisible. Find the screw cap, remove it with a movable handle, and replace it with a new one. The general position of the screw cap is not easy to find, some in the light, some in the dark. Screw cap in the dark, inside the toilet against the side of the tank, open the cover. Reach in with the hand, upward, to the direction of the water tank, should be able to touch, see is invisible.
